POR-15 Rust Preventive Paint - 1 GALLON - GREY

Stop rust permanently with POR-15! Unlike ordinary “paints”, POR-15 is designed to be coated right onto rusty surfaces, leaving a beautiful, rock-hard finish that won’t crack, chip or peel. Use it to coat a rusty frame, floor pans, farm equipment, underwater marine items, or even a heavily corroded battery tray, and stop rust permanently in its tracks! The secret lies in the POR-15 curing process. Unlike “paint”, POR-15 cures by drawing moisture from the atmosphere. Paint, on the other hand, cures through the process of solvent evaporation through pores (that’s why you can smell a paint job for weeks). Those same pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal. As you know, if ordinary paint goes unwaxed for very long, rust will form right through it! But POR-15 doesn’t have those pores, and thus moisture and oxygen cannot reach the metal surface, and therefore no rust can occur. Eliminate stone chips while you’re at it. POR-15 is so tough, that some folks describe it as “powder-coat in a can.” Use it on your chassis, and you’ll be surprised as how little effect gravel roads have on the finish. In fact, off-road enthusiasts and dirt bike racers use it on their frames and under-carriages, where NO “paint” can survive. Furthermore, POR-15 is very flexible, and can withstand much twisting and bending without cracking. Use POR-15 on anything that you want to protect permanently from rust, stone chips, or other common “paint” failures. POR-15® is sensitive to UV light (sun) and must be topcoated for prolonged exposure to sunlight. Topcoating is not required for areas not exposed to sunlight. Available in glossy black, semi-gloss black, or grey. Download (Microsoft Word required).